Switch actuator with C-load, 4-gang
with current detection
Rail mounting device, 4 rail units
4 make contacts with manual mechanical operation and status indicator
For projecting and commissioning the use of ETS 3.0d is recommended.
Only with this version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output
Technical data | | |
| KNX supply: | 21 ... 32 V DC |
| Wiring, KNX: | KNX bus connection block |
| Wiring, outputs: | screw terminals |
| | single wire: | 0.5 ... 4 mm2 |
| | stranded without ferrule: | 0.5 ... 4 mm2 |
| | stranded with ferrule: | 0.5 ... 2.5 mm2 |
| Switch type: | make contact, potential-free (μ-contact) |
| Relay type: | bistable |
| Switching capacities | |
| Contact rating: | 16 A / 230 V AC 1 |
| Switching capacity: | acc. to DIN 60669 16 A / 200 μF
acc. to DIN 60947-4-1 AC 1 16 A
acc. to DIN 60947-4-1 AC 3 16 A |
| | ohmic load: | 3600 W |
| | Incandescent lamps: | 3600 W |
| | HV halogen lamps: | 3600 W |
| | LV halogen lamps with: | |
| | – TRONIC transformer: | 2500 W |
| | – conventional transformer: | 2000 W |
| | Fluorescent lamps non-compensated: | 3600 W |
| | Fluorescent lamps compensated: | 2500 W |
| | Fluorescent lamps lead-lag circuit: | 2500 W |
--
