KNX Room actuator 230 V

Room actuator 230 V

Rail mounting device, 4 rail units
with manual electronic operation and LED status indicator
For projecting and commissioning the use of ETS 3.0d is recommended.
Only with this version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output

• Switching of electrical consumers AC 230 V with potential-free contacts
• Switching of electrically operated blinds, shutters, awnings and similar curtains
• Heating outputs: electronic outputs for switching electro-thermal valve drives

• Manual output control, provisional operation
• Feedback in manual control mode and in bus operation
• Scene function
• Disabling of individual outputs by hand or via the bus

• Make-contact and break-contact operation
• Logic operation and forcing function
• Feedback function
• Central switching function with group feedback
• Time functions: ON-delay, OFF-delay, staircase lighting timer with early-warning function

• Suitable for AC motors 230 V
• Direct control of blind/shutter position
• Direct control of slat position
• Checkback of running state, blind/shutter position and slat position
• Forced-control position from primary control
• Safety function: 3 independent wind alarms, rain alarm, frost alarm
• Sun protection function

• Switching or PWM operation
• Control of valve drives with working characteristics "normally open" or "normally closed“
• Overload and short-circuit protection
• Emergency operation in the event of bus failure for summer and winter
• Protection against jamming valves
• Forced-control position