Control unit 1 – 10 V, 2-gang
0 Rail mounting device, 4 rail units
ETS product family: Illumination
Product type: Dimmer
Technical data
Input
Number: 2
Signal voltage: 1 ... 10 V
Signal current: max. 100 mA per channel
dependent on type of ballast
(e.g. 1 INSTA ELB: approx. 0.8 mA, Siemens ELB: approx. 1 mA, Helvar ELB: approx. 4 mA)
Signal duration: continuous
Wiring: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Length of input cable: max. 500 m at 0,5 mm2
Output
Number: 2
Switch type: make contact, potential-free
Max. switching voltage: AC 230 V ~ 50 Hz
Max. switching current: 16 A/AC-1; 10 A/AC-3
Wiring: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Switching capacity
ohmic load: 2500 W
capacitive load: 1100 W / 140 μF
Fluorescent lamps with electronic ballast: dependent on type due to different inrush currents
--
